Cisco Prisma II - System Requirements; Computer Requirements; Cable Requirements

System Requirements
78-4015908-01 Rev F 77
System Requirements
You will need the following computer software and hardware to run LCI.
Computer Requirements
 Pentium II 300 MHz processor or equivalent
 128 MB RAM
 10 MB available hard drive space
 CD-ROM Drive
 Windows 95 or later operating system software
Cable Requirements
The required cable is a standard serial extension cable, DB9 Female to DB9 Male.
This cable can be purchased locally or ordered from the factory as part number
180143. The connectors are a serial 9-pin D-shell (EIA 574/232).