Cisco Prisma II - Chapter 1 Module Introduction

78-4015908-01 Rev F 1
Overview
This chapter describes the Prisma II High Density Dual Reverse
Receiver Module.
Purpose
This guide provides information about the receiver. This chapter
describes the front and back panels, and presents a setup summary for
the receiver.
Who Should Use This Document
This document is intended for authorized service personnel who have
experience working with similar equipment. The service personnel
should have appropriate background and knowledge to complete the
procedures described in this document.
Qualified Personnel
Only appropriately qualified and skilled personnel should attempt to
install, operate, maintain, and service this product.
WARNING:
Only appropriately qualified and skilled personnel should attempt
to install, operate, maintain, and service this product. Otherwise,
personal injury or equipment damage may occur.
1 Chapter 1
Module Introduction