Cisco Prisma II - Previous IP Address

Chapter 3 Operation using ICIM
70 78-4015908-01 Rev F
Variable Description
p2RemoveModuleIndex The index for this table. The most recently removed
module is always in index position 1.
p2RemoveModuleChassisID The chassis ID number of the removed module.
p2RemoveModuleSlotID The slot ID number of the removed module.
p2RemoveModuleName The name of the removed module. This is the name
from the plug-and-play data for this module, and
matches what the ICIM and SNMP display as the
name. TNCS and LCI may use a different name.
p2RemoveModuleType The TNCS type number of the removed module. This
number uniquely identifies every type of module.
p2RemoveModuleSerialNum The serial number of the removed module. This
information is needed to determine if a module has
been replaced with one that is the same type.
Previous IP Address
This variable is named p2PreviousIP. When the IP of the ICIM is changed using the
front panel, this variable returns the previous ICIM IP address. It returns 0.0.0.0 until
the IP address of the ICIM is changed for the first time.