Accessing the Module Detail Information
The Module Details window displays information about module parameters, alarms,
and status. You can access this window from the module tree using any of these
methods:
Double-click the chassis and select the module in the graphic that appears.
Right-click the chassis and select Open from the menu that appears.
Double-click the module.
Right-click the module and select Details from the menu that appears.
This section describes the steps for accessing module information using all of these
methods. In practice, use the method most convenient for you.
Module Details Window
The Module Details window displays slightly different information depending on
the module operating mode.
In Single mode, the Module Details screen window appears as shown in the
following example.
To Next Page
Loading...
