Cisco Prisma II - Installing LCI; To Install the LCI Software

Chapter 4 Operation using LCI
78 78-4015908-01 Rev F
Installing LCI
This section describes how to install your LCI software.
To Install the LCI Software
Complete the following steps to install the LCI software.
1 Obtain the LCI installation program from customer support and copy the
program file to your Windows desktop. See Customer Support Information (on
page 105) to locate customer support for your area.
2 Launch the LCI installation program. The Welcome screen appears as shown in
the following illustration.
3 Click Next to continue with the installation process.