Cisco Prisma II - Appendix A Module Parameter Descriptions; In this Appendix

78-4015908-01 Rev F 107
A Appx auto letter
Appendix A
Module Parameter
Descriptions
Introduction
This appendix provides manufacturing data, monitored parameters,
configurable parameters, and alarms for the Prisma II High Density
Dual Reverse Receiver module. The examples shown in the tables are
for guidance only.
CAUTION:
The warranty may be voided and the equipment damaged if you
operate the equipment above the specified temperature limits
(131°F/55°C for post-amplifiers, 149°F/65°C for other products).
Specification temperature limits are measured in the air stream at
the fan tray inlet and may be higher than room ambient
temperature.
In This Appendix

Receiver Parameters ........................................................................... 108