Cisco Prisma II - Checking Manufacturing Data Using the ICIM; To Check Manufacturing Data

Checking Manufacturing Data using the ICIM
78-4015908-01 Rev F 61
Checking Manufacturing Data using the ICIM
To Check Manufacturing Data
You can display the manufacturing data for this module on the ICIM LCD.
Complete the following steps to access the manufacturing data.
1 From the MAIN menu, press the

key to highlight the Shelf and Slot fields.
2 Press the
SEL
key to address the Shelf number. Then press the

key or the
key to scroll to the number of the desired shelf.
3 Press the
ENTER
key. The Slot field is highlighted.
4 Press the

key or the
key to scroll to the number of the desired slot.
5 Press the
ENTER
key. The MODULE menu for this module will be selected, as
shown on the left below. Press the

key to enter the start of the MFG. DATA
menus, as shown on the right below.
MODULE
Shelf 5
Slot 12
TP563
Alarms
1
Mfg. Data
MFG. DATA
Shelf 5
Slot 12
Module
Type
2022
P 2 - HD- RXR-
HG
P 2 - HD- RXR-
HG
Use the

and

keys to scroll through the manufacturing data.