Cisco Prisma II - Checking the Operating Status Using the ICIM; To Check the Operating Status Using ICIM

Checking the Operating Status using the ICIM
78-4015908-01 Rev F 55
Checking the Operating Status using the ICIM
To Check the Operating Status using ICIM
You can use the ICIM to check the status of all operating parameters of this module.
All status information is displayed on the ICIM LCD.
1 At the MAIN menu, press the

key to highlight the Shelf and Slot fields.
2 Press the
SEL
key to address the Shelf number. Then press the

key or the
key to scroll to the number of the desired shelf.
3 Press the
ENTER
key.
Result: The Slot field is highlighted.
4 Press the

key or the
key to scroll to the number of the desired slot.
5 Press the
ENTER
key.
Result: The MODULE menu displays on the ICIM.
6 Press the
STAT
key.
7 Press the

key or the

key to scroll through the monitored parameters
until you find the parameter of interest.
8 Check the status of the desired parameter or select other parameters to monitor.
When finished, press the
MAIN
key to return to the MAIN menu.