Cisco Prisma II - Saving the Configuration Using the ICIM; To Save the Current Configuration; Configuration Complete

Saving the Configuration using the ICIM
78-4015908-01 Rev F 63
Saving the Configuration using the ICIM
To Save the Current Configuration
1 After you have changed a parameter or entered data, press the
ENTER
key to save
the changes and return to the MAIN menu.
2 If you do not save your changes for two minutes, or if you press the
SHIFT
CAN
keys at the same time, changes are aborted and the display returns to the MAIN
menu.
Configuration Complete
If no alarms are indicated after using the ICIM to configure this module to your
system specifications, no further action is necessary. The module operates without
further input. Alarms, changes in operating parameters, electrical power
fluctuations, or changes in system design may be cause for additional action.