Cisco Prisma II - Page 133

Receiver Parameters
78-4015908-01 Rev F 109
Parameter
Name (LCI)
ICIM
Abbreviation
Function
Operating
Range
Redundant
Receiver 1
Status
1
RedRx1 Indicates the status of the redundant
mate for Rx1:
Off = receiver disabled or in critical
alarm
Stby = receiver enabled with no alarms,
but in Slave mode (no RF output)
Active = receiver operating normally (RF
output active)
Missing = redundant receiver not
detected
Off (0)
Stby (1)
Active (2)
Missing (3)
Redundant
Receiver 2
Status
1
RedRx2 Indicates the status of the redundant
mate for Rx2:
Off = receiver disabled or in critical
alarm
Stby = receiver enabled with no alarms,
but in Slave mode (no RF output)
Active = receiver operating normally (RF
output active)
Missing = redundant receiver not
detected
Off (0)
Stby (1)
Active (2)
Missing (3)
1
Visible in LCI in Independent mode only.