Cisco SFE2000P User Manual

x
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
About this Guide
Organization
Organization
The major sections of this guide are as follows:
Ta b l e 1
Chapter Title Description
Chapter 1 General Overview This chapter provides a brief
introduction to Cisco Service
Control.
Chapter 2 Introduction to the SCE Platform This chapter provides a hardware
overview of the SCE 2000
platform.
Chapter 3 Information About Topology This chapter describes the
possible deployment topologies
of the SCE 2000 and explains
how various aspects of the
topology determine the
configuration of the system.
Chapter 4 Installation and Maintenance This chapter explains how to
install a SCE 2000 platform in a
rack or in a general tabletop
installation and how to install or
replace the power supply units
and fan modules.
Chapter 5 Connecting the Management
Interfaces and Performing Initial
System Configuration
This chapter explains how to
connect the SCE 2000 platform
to a local console and perform
the initial system configuration
via the setup wizard that runs
automatically.
Chapter 6 Cabling the Line Ports and
Completing the Installation
This chapter provides
instructions for cabling the
Gigabit Ethernet ports for both
one and two SCE 2000
topologies, and for configuring
Gigabit Ethernet (GBE)
interface parameters. In a
topology utilizing two SCE 2000
s (cascade), this includes the
cascade ports as well as the line
ports.
Chapter 7 Basic SCE 2000 Platform
Operations
This chapter describes how to
start up the SCE 2000 platform,
reboot, and shutdown. It also
describes how to manage
configurations.

Cisco SFE2000P Specifications

General

Brand	Cisco
Model	SFE2000P
Category	Network Router
Language	English