Administration: Discovery
Discovery - CDP
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 136
8
The filter is triggered, and Clear Filter is activated.
STEP 3 Click Clear Filter to stop the filter.
The CDP Neighbor Information page contains the following fields for the link partner
(neighbor):
• Device ID—Neighbors device ID.
• System Name—Neighbors system name.
• Local Interface—Number of the local port to which the neighbor is connected.
• Advertisement Version—CDP protocol version.
• Time to Live (sec)—Time interval (in seconds) after which the information for this
neighbor is deleted.
• Capabilities—Capabilities advertised by neighbor.
• Platform—Information from Platform TLV of neighbor.
• Neighbor Interface—Outgoing interface of the neighbor.
STEP 4 Select a device, and click Details.
This page contains the following fields about the neighbor:
• Device ID—Identifier of the neighboring device ID.
• System Name—Name of the neighboring device ID.
• Local Interface—Interface number of port through which frame arrived.
• Advertisement Version—Version of CDP.
• Time to Live—Time interval (in seconds) after which the information for this neighbor
is deleted.
• Capabilities—Primary functions of the device. The capabilities are indicated by two
octets. Bits 0 through 7 indicate Other, Repeater, Bridge, WLAN AP, Router,
Telephone, DOCSIS cable device, and station respectively. Bits 8 through 15 are
reserved.
• Platform—Identifier of the neighbors platform.
• Neighbor Interface—Interface number of the neighbor through which frame arrived.
• Native VLAN—Neighbors native VLAN.
• Application—Name of application running on the neighbor.
To Next Page
Loading...
Need help?
General
