Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Administration

Discovery - Bonjour

77 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

Discovery - Bonjour

See Bonjour.

Discovery - LLDP

See Discover - LLDP.

Discovery - CDP

See Discovery - CDP.

Ping

The Ping utility tests if a remote host can be reached and measures the round-trip time for

packets sent from the device to a destination device.

Ping operates by sending Internet Control Message Protocol (ICMP) echo request packets to

the target host and waiting for an ICMP response, sometimes called a pong. It measures the

round-trip time and records any packet loss.

To ping a host:

STEP 1 Click Administration > Ping.

STEP 2 Configure ping by entering the fields:

• Host Definition—Select whether to specify the source interface by its IP address or

name. This field influences the interfaces that are displayed in the Source IP field, as

described below.

• IP Version—If the source interface is identified by its IP address, select either IPv4 or

IPv6 to indicate that it will be entered in the selected format.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General