Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 172

Smartport

This document describes the Smartports feature.

It contains the following topics:

•Overview

• How the Smartport Feature Works

• Auto Smartport

• Error Handling

• Default Configuration

• Relationships with Other Features

• Common Smartport Tasks

• Configuring Smartport Using The Web-based Interface

• Built-in Smartport Macros

Overview

The Smartport feature provides a convenient way to save and share common configurations.

By applying the same Smartport macro to multiple interfaces, the interfaces share a common

set of configurations. A Smartport macro is a script of CLI (Command Line Interface)

commands.

A Smartport macro can be applied to an interface by the macro name, or by the Smartport type

associated with the macro. Applying a Smartport macro by macro name can be done only

through CLI. Refer to the CLI guide for details.

There are two ways to apply a Smartport macro by Smartport type to an interface:

• Static Smartport—You manually assign a Smartport type to an interface. The result is

the corresponding Smartport macro is applied to the interface.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General