Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 30

Configuration Wizards

This section describes the following configuration wizards:

It covers the following topics:

• Getting Started Wizard

• VLAN Configuration Wizard

•ACL Wizard

Getting Started Wizard

This wizard assists in the initial configuration of the device.

STEP 1 Click Configuration Wizards > Getting Started Wizard.

STEP 2 Click Launch Wizard and Next.

STEP 3 Enter the fields:

• System Location—Enter the physical location of the device.

• System Contact—Enter the name of a contact person.

• Host Name—Select the host name of this device. This is used in the prompt of CLI

commands:

- Use Default—The default hostname (System Name) of these switches is:

switch123456, where 123456 represents the last three bytes of the device MAC

address in hex format.

- User Defined—Enter the hostname. Use only letters, digits, and hyphens. Host

names cannot begin or end with a hyphen. No other symbols, punctuation

characters, or blank spaces are permitted (as specified in RFC1033, 1034, 1035).

STEP 4 Click Next.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General