Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

VLAN Management

Customer Port Multicast TV VLAN

241 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

CPE VLAN to VLAN

To support the CPE MUX with subscribers VLANs, subscribers may require multiple video

providers, and each provider is assigned a different external VLAN.

CPE (internal) Multicast VLANs must be mapped to the Multicast provider (external)

VLANs.

After a CPE VLAN is mapped to a Multicast VLAN, it can participate in IGMP snooping.

To map CPE VLANs:

STEP 1 Click VLAN Management > Customer Port Multicast TV VLAN > CPE VLAN to

VLAN.

STEP 2 Click Add.

STEP 3 Enter the following fields:

• CPE VLAN—Enter the VLAN defined on the CPE box.

• Multicast TV VLAN—Select the Multicast TV VLAN which is mapped to the CPE

VLAN.

STEP 4 Click Apply. CPE VLAN Mapping is modified, and written to the Running Configuration file.

Port Multicast VLAN Membership

The ports associated with the Multicast VLANs must be configured as customer ports (see

Interface Settings).

To map ports to Multicast TV VLANs:

STEP 1 Click VLAN Management > Customer Port Multicast TV VLAN > Port Multicast VLAN

Membership.

STEP 2 Select a VLAN from Multicast TV VLAN.

STEP 3 Select an interface from Interface Type.

STEP 4 The Candidate Customer Ports list contains all access ports configured on the device. Move

the required ports to the Member Customer Ports field.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General