Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Spanning Tree

MSTP Interface Settings

235 Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x

- If the link partner is using STP, the displayed port mode is STP.

• Type—Displays the MST type of the port.

- Boundary—A Boundary port attaches MST bridges to a LAN in a remote region. If

the port is a boundary port, it also indicates whether the device on the other side of

the link is working in RSTP or STP mode.

- Internal—The port is an internal port.

• Designated Bridge ID—Displays the ID number of the bridge that connects the link or

shared LAN to the root.

• Designated Port ID—Displays the Port ID number on the designated bridge that

connects the link or the shared LAN to the root.

• Designated Cost—Displays the cost of the port participating in the STP topology. Ports

with a lower cost are less likely to be blocked if STP detects loops.

• Remain Hops—Displays the hops remaining to the next destination.

• Forward Transitions—Displays the number of times the port has changed from the

Forwarding state to the Blocking state.

STEP 6 Click Apply. The Running Configuration file is updated.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General