Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Status and Statistics

System Summary

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 36

• Firmware Version (Non-active)—Firmware version number of the non-active image.

If the system is in a stack, the version of the master unit is displayed.

• Firmware MD5 Checksum (Non-active)—MD5 checksum of the non-active image.

• Locale—Locale of the first language. (This is always English.)

• Language Version—Language package version of the first or English language.

• Language MD5 Checksum—MD5 checksum of the language file.

TCP/UDP Services Status:

To reset the following fields, click Edit to open the TCP/UDP Services page.

• HTTP Service—Whether HTTP is enabled/disabled.

• HTTPS Service—Whether HTTPS is enabled/disabled.

• SNMP Service—Whether SNMP is enabled/disabled.

• Telnet Service—Whether Telnet is enabled/disabled.

• SSH Service—Whether SSH is enabled/disabled.

PoE Power Information on Master Unit: (on devices supporting PoE)

• PoE Power Information on Master Unit—Click on Detail to link you directly to the

Overview page. This page shows the PoE power information on a per-unit basis.

• Maximum Available PoE Power (W)—Maximum available power that can be

delivered by the switch.

• Total PoE Power Consumption (W)—Total PoE power delivered to connected PoE

devices.

• PoE Power Mode—Port Limit or Class Limit.

The master unit is displayed graphically., as shown below:

Hovering on a port displays its name.

The following information is displayed for each unit:

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General