Cisco SG350X-24 User Manual

Smart Network Application (SNA)
Right-Hand Information Panel
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 658
29
• Explore Connection—This option appears when a single connection is selected.
Selecting this action opens the connection explorer for the selected connection.
• Explore Client Group—This option appears when a client group is selected.
Selecting this action opens the client explorer, filtered by the type of device in the
client group.
• Delete—This option only appears when all the selected devices are offline devices.
Selecting this action deletes all the selected devices from the topology map.
Basic Information Block
The Basic Information block displays attributes of the selected single element. The block is
not displayed when more than one entity is selected.
Some of the information is shown at all times, and some is shown only if the View All button
is clicked.
If no information is received on a certain parameter, that parameter is not displayed in the
Basic Information section.

Cisco SG350X-24 Specifications

General

Model	SG350X-24
Layer	Layer 3
Power Supply	Internal
Rack Mountable	Yes
RAM	512 MB
Flash Memory	256 MB
MAC Address Table	16K entries
Power over Ethernet (PoE)	No
Uplink Ports	4 x 10 Gigabit Ethernet
Jumbo Frame Support	Yes
Power Dedicated to PoE	Not applicable
Dimensions	440 x 44 x 350 mm
Stacking	Yes
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Relative Humidity	10% to 90% (non-condensing)
Power Consumption	30W (maximum)