Cisco SG350X-24 User Manual

Smart Network Application (SNA)
Services
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 697
29
• Local Clock—Displayed if the clock source is local.
• Current time—Display of the current time and time zone offset.
Editable Parameters:
To change the clock source select one of the following options:
• Default SNTP Servers—Deletes all configured SNTP servers and re-creates three
default servers.
• User Defined SNTP Server—Add the address of the SNTP server by entering
either host name, IPv4 or IPv6. When applying the server, all current configured
servers are deleted, and the server one is added. Time Zone must be configured with
this option.
• Local Clock—Changes the device clock source to local clock. The date, time and
time zone must be configured.
• Set Date and Time—Date and time if local clock is configured.
• Time Zone—Time zone offset if a user-defined SNTP server or local time is
configured.
File Management
Unlike the services previously mentioned, the File Management service does not change the
configuration of the selected devices directly. Instead, it performs an operation on all selected
devices. Use this service to download new firmware versions or configuration files to the
selected devices or reboot them.

Cisco SG350X-24 Specifications

General

Model	SG350X-24
Layer	Layer 3
Power Supply	Internal
Rack Mountable	Yes
RAM	512 MB
Flash Memory	256 MB
MAC Address Table	16K entries
Power over Ethernet (PoE)	No
Uplink Ports	4 x 10 Gigabit Ethernet
Jumbo Frame Support	Yes
Power Dedicated to PoE	Not applicable
Dimensions	440 x 44 x 350 mm
Stacking	Yes
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Relative Humidity	10% to 90% (non-condensing)
Power Consumption	30W (maximum)