Cisco SG350X-24 User Manual

Smart Network Application (SNA)
Services
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 701
29
Power Management Policy
This service enables setting power policies for selected devices.
NOTE This service is not available on Sx200/Sx250 devices.
Current Configuration
For every selected device, the current power schedule parameters are displayed, as shown
below::
The following parameters are displayed:
• SNA Power Schedule (active/inactive)
• Power schedule details if active
• Whether time power is active each day, beginning on Monday and ending on Sunday
• Behavior of ports in off-schedule times. The options include:
- PoE power inactive
- Data inactive
- Both PoE power and data inactive
- Custom—Displayed if an SNA-created schedule is not applied uniformly to all
Access ports. Access ports are ports whose VLAN mode is Access.
- Configured ports—A list of all ports that are bound to the SNA-created schedule.

Cisco SG350X-24 Specifications

General

Model	SG350X-24
Layer	Layer 3
Power Supply	Internal
Rack Mountable	Yes
RAM	512 MB
Flash Memory	256 MB
MAC Address Table	16K entries
Power over Ethernet (PoE)	No
Uplink Ports	4 x 10 Gigabit Ethernet
Jumbo Frame Support	Yes
Power Dedicated to PoE	Not applicable
Dimensions	440 x 44 x 350 mm
Stacking	Yes
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Relative Humidity	10% to 90% (non-condensing)
Power Consumption	30W (maximum)