Cisco SG500-28 Administration Guide

Administration: Discovery
Configuring LLDP
135 Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
9
- Endpoint Class 1 —Indicates a generic endpoint class, offering basic
LLDP services.
-
Endpoint Class 2 —Indicates a media endpoint class, offering media
streaming capabilities, as well as all Class 1 features.
-
Endpoint Class 3 —Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 device support,
and device information management capabilities.
• PoE Device Type—Port PoE type; for example, powered.
• PoE Power Source—Port power source.
• PoE Power Priority—Port power priority.
• PoE Power Value—Port power value.
• Hardware Revision—Hardware version.
• Firmware Revision—Firmware version.
• Software Revision—Software version.
• Serial Number—Device serial number.
• Manufacturer Name—Device manufacturer name.
• Model Name—Device model name.
• Asset ID—Asset ID.
Location Information
• Civic—Street address.
• Coordinates—Map coordinates: latitude, longitude, and altitude.
• ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy Table
• Application Type—Network policy application type; for example, Voice.
• VLAN ID—VLAN ID for which the network policy is defined.
• VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
-
Ta g g e d —Indicates the network policy is defined for tagged VLANs.

Cisco SG500-28 Specifications

General

Ports	28
Port Type	Gigabit Ethernet
Layer	Layer 3
Switching Capacity	56 Gbps
PoE Support	No
Form Factor	Rack-mountable
RAM	256 MB
Flash Memory	32 MB
Power Supply	Internal
Jumbo Frame Support	9KB
VLAN Support	Yes
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	10% to 90% non-condensing
Dimensions	17.3 x 10.2 x 1.7 in (440 x 260 x 44 mm)
MAC Address Table Size	16, 000 entries