Cisco SG500-28 Administration Guide

26
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3 510
SNMP
This section describes the Simple Network Management Protocol (SNMP) feature
that provides a method for managing network devices.
It covers the following topics:
• SNMP Versions and Workflow
• Model OIDs
• SNMP Engine ID
• Configuring SNMP Views
• Creating SNMP Groups
• Managing SNMP Users
• Defining SNMP Communities
• Defining Trap Settings
• Notification Recipients
• SNMP Notification Filters
SNMP Versions and Workflow
The device functions as SNMP agent and supports SNMPv1, v2, and v3. It also
reports system events to trap receivers using the traps defined in the supported
MIBs (Management Information Base).

Cisco SG500-28 Specifications

General

Ports	28
Port Type	Gigabit Ethernet
Layer	Layer 3
Switching Capacity	56 Gbps
PoE Support	No
Form Factor	Rack-mountable
RAM	256 MB
Flash Memory	32 MB
Power Supply	Internal
Jumbo Frame Support	9KB
VLAN Support	Yes
Operating Temperature	32°F to 113°F (0°C to 45°C)
Operating Humidity	10% to 90% non-condensing
Dimensions	17.3 x 10.2 x 1.7 in (440 x 260 x 44 mm)
MAC Address Table Size	16, 000 entries