12
9
Setup button
Press to access a menu to configure features and
preferences (such as your directory, status, and speed
dials), access your call history, set up functions (such as
call forwarding), and provide phone status information.
For the Cisco SPA501G, press Setup to access the
Interactive Voice Response (IVR) menu that allows you to
perform tasks such as getting the IP address of the
phone.
10
Mute button
Press to mute or unmute the phone. When phone is
muted, the button is lit red. A blinking or steady red mute
button indicates the network connection cannot be found.
11
Volume button
Press
to increase the volume and - to lower the volume
of the handset, headset, speaker when the phone is off-
hook, or ringer volume when the phone is on-hook.
12
Headset button
Push to turn the headset on or off. When the headset is
on, the button is lit green.
13
Speaker button
Push to turn the speaker on or off. When the speaker is
on, the button is lit green.
14
Keypad
Use to dial phone numbers, enter letters, and choose
menu items.
To Next Page
Loading...
Need help?
General
