42
When finished with the name, use the navigation button to go down to the Number field.
STEP 3 Enter the phone number, including any digits you must dial to access an outside line
and the appropriate area code.
STEP 4 (Optional) To change the ring type for the caller:
a.
Press the
option
softkey.
b.
Scroll through the available ring types.
c.
Press the
play
softkey to play the selected ring tone or press the
select
softkey
to assign that ringtone to the number you are adding to the directory.
STEP 5 Press
save
to save the entry.
Using the Call History Lists
You can also view the Call History Lists from your PC using the web configuration utility. You can only
view call history lists for the Cisco SPA501G using the web configuration utility.
To view or call a number on the Call History lists:
STEP 1 Press the Setup button.
STEP 2 Select Call History.
STEP 3 Select the Call History list you want to view. Available Call History lists are:
•
Redial List—Shows the last 60 numbers dialed from your phone.
•
Answered Calls—Shows the caller ID of the last 60 answered calls.
•
Missed Calls—Shows the last 60 missed calls.
To dial a number from one of the Call History lists, choose the call and press
dial
.
If the call was from a long distance number, you might have to edit the call before dialing it.
Press the
Edit
softkey to edit the call and use the softkey buttons and keypad to edit the number.
To Next Page
Loading...
Need help?
General
