Cisco SPA 504G User Manual

26
Using the Headset with Your IP Phone
Once you install the headset, use these steps to use your headset with the IP phone might vary.
Consult the user documentation for your headset for more information.
To use a wired headset, press Headset on your phone and dial the number to place a call, or press
Headset to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening through the headset.

Cisco SPA 504G Specifications

General

Lines	4
Protocols	SIP, SPCP
Speakerphone	Yes
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet (PoE)	Yes
Voice Codecs	G.711, G.726, G.729
Headset Port	Yes (2.5mm)
Display	Monochrome LCD