Cisco SPA 504G User Manual

16
Using Keypad Shortcuts
When using the phone menus, you can use the keypad to enter the number shown next to the menu or
sub-menu item on the IP phone screen. (Not applicable to the Cisco SPA501G.)
For example, to obtain your IP address on the Cisco SPA 504G, press the Setup button and dial 9.
Button
Function
pickup Answers a call ringing on another extension by entering the extension
number.
hold Puts a call on hold on an active shared line.
redial Displays a list of recently dialed numbers.
resume Resumes a call that is on hold.
save Saves your changes.
select
Selects the highlighted item on the IP phone screen .
starcode Allows you to enter a star code. See “Using Star Codes”.
unpark Resumes a parked call.
xfer Performs a call transfer.
xferLx Transfers an active line on the phone to a called number.
y/n Enters a submenu and when pressed, toggles between
Yes
or
No
to
enable or disable an option.

Cisco SPA 504G Specifications

General

Lines	4
Protocols	SIP, SPCP
Speakerphone	Yes
Ethernet Ports	2 (10/100 Mbps)
Power over Ethernet (PoE)	Yes
Voice Codecs	G.711, G.726, G.729
Headset Port	Yes (2.5mm)
Display	Monochrome LCD