46
Blocking Anonymous Calls
Blocking anonymous calls prevents calls with unknown Caller ID from ringing your phone. (For
example, if a caller set his phone to not display Caller ID, the call is considered anonymous.) These
callers receive a busy signal or message.
Using the Setup button:
STEP 1 Press the Setup button.
STEP 2 Select
Preferences
.
STEP 3 Choose Block Anonymous Call and press edit.
STEP 4 Press y/n to choose yes (enable) or no (disable).
STEP 5 Press ok.
STEP 6 Press save.
Enabling and Using Dial Assistance
If you enable dial assistance, when you place calls, the display shows phone numbers based on the
best matched entries from the Directory and Call History lists. You can call a number on the matched
entries list. (Not available for the Cisco SPA501G.)
To enable dial assistance:
STEP 1 Press the Setup button.
STEP 2 Select
Preferences
.
STEP 3 Choose Dial Preferences and press edit.
STEP 4 Press y/n to choose yes (enable) or no (disable).
STEP 5 Press ok.
To Next Page
Loading...
