10
4
Line keys
Indicates phone line status.
When lit:
: Line is idle.
(steady): Line is active or in use.
(flashing): Line is on hold or there is an inbound call.
: Line is unregistered (cannot be used).
These keys can also be programmed by your system
administrator to perform differently than described here
or to add functions such as speed dial, call pickup, or
monitor an extension.
5
Softkey buttons
Press a softkey button to perform the action shown on
the label on the
IP phone screen
.
: The Cisco SPA501G has the following four buttons:
Redial—Dials the last number called.
Cancel—Cancels an action (such as a
transfer).
Conference—While on a call, press to start a
conference call and dial another number. After
the second party answers, press
again to
create the conference.
Transfer—Transfers a call.
6
Navigation button
Press an arrow key to scroll left, right, up, or down
through items shown on the
IP phone screen
(except on
the Cisco SPA501G).
7
Messages button
Press to access voice mail. (This feature must be set up
by your phone system administrator).
To Next Page
Loading...
Need help?
General
