Field Description Usage tips
Default CPL This is the fallback CPL used by the VCS if the
service is not available.
You can change it, for example, to redirect
to an answer service or recorded
message.
For more information, see Default CPL for
policy services [p.492].
4. Click Save.
The VCS should connect to the policy service server and start using the service for Registration Policy
decisions.
Any connection problems will be reported on this page. Check the Status area at the bottom of the page
and check for additional information messages against the Server address fields.
Cisco VCS Administrator Guide (X8.1.1) Page 100 of 507
Registration control
Configuring Registration Policy to use an external service
To Next Page
Loading...
