1. Click on the Name of the module whose log level you want to modify.
2. Choose the required Level from the drop-down list.
l A log level of Fatal is the least verbose; Trace is the most verbose.
l Each message category has a log level of Info by default.
3. Click Save.
Configuring Support Log levels
The Support Log configuration page (Maintenance > Diagnostics > Advanced > Support Log
configuration) is used to configure the log levels for the range of Support Log message modules.
CAUTION: changing the logging levels can affect the performance of your system. You should only change
a log level on the advice of Cisco customer support.
To change a logging level:
1. Click on the Name of the module whose log level you want to modify.
2. Choose the required Level from the drop-down list.
l A log level of Fatal is the least verbose; Trace is the most verbose.
l Each message category has a log level of Info by default.
3. Click Save.
Cisco VCS Administrator Guide (X8.1.1) Page 305 of 507
Maintenance
Diagnostics tools
To Next Page
Loading...
