Cisco TelePresence Administrator's Guide

Flash status word reference table
The flash status word is used in diagnosing NTP server synchronization issues.
It is displayed by the ntpq program rv command. It comprises a number of bits, coded in hexadecimal as
follows:
Code Tag Message Description
0001 TEST1 pkt_dup duplicate packet
0002 TEST2 pkt_bogus bogus packet
0004 TEST3 pkt_unsync server not synchronized
0008 TEST4 pkt_denied access denied
0010 TEST5 pkt_auth authentication failure
0020 TEST6 pkt_stratum invalid leap or stratum
0040 TEST7 pkt_header header distance exceeded
0080 TEST8 pkt_autokey Autokey sequence error
0100 TEST9 pkt_crypto Autokey protocol error
0200 TEST10 peer_stratum invalid header or stratum
0400 TEST11 peer_dist distance threshold exceeded
0800 TEST12 peer_loop synchronization loop
1000 TEST13 peer_unreach unreachable or nonselect
Cisco VCS Administrator Guide (X8.1.1) Page 493 of 507
Reference material
Flash status word reference table

Cisco TelePresence Specifications

General

Brand	Cisco
Model	TelePresence
Category	Server
Language	English