Dial plan and call processing
This section provides information about the pages that appear under the Calls, Dial plan, Transforms and Call
Policy sub-menus of the Configuration menu. These pages are used to configure the way in which the VCS
receives and processes calls.
Call routing process 172
Configuring hop counts 174
Configuring dial plan settings 175
About transforms and search rules 176
Example searches and transforms 182
Configuring search rules to use an external service 191
About Call Policy 194
Supported address formats 199
Dialing by IP address 201
About URI dialing 203
About ENUM dialing 211
Configuring DNS servers for ENUM and URI dialing 217
Configuring call routing and signaling 218
Identifying calls 219
Disconnecting calls 220
Cisco VCS Administrator Guide (X8.1.1) Page 171 of 507
To Next Page
Loading...
