Field Value
Request must be
authenticated
No
Mode Alias pattern match
Pattern type Suffix
Pattern string example.com
Pattern behavior Replace
Replace string example.co.uk
On successful match Continue
Target zone Head office
State Enabled
Query a zone for original and transformed alias
You may want to query a zone for the original alias at the same time as you query it for a transformed alias.
To do this, configure one search rule with a Mode of Any alias, and a second search rule with a Mode of Alias
pattern match along with details of the transform to be applied. Both searches must be given the same
Priority level.
For example, you may want to query a neighbor zone for both a full URI and just the name (the URI with the
domain removed). To achieve this, on your local VCS from the Create search rule page (Configuration >
Dial plan > Search rules > New) set up two search rules as follows:
Rule #1
Field Value
Rule name Overseas office - original alias
Description Query overseas office with the original alias
Priority 100
Source Any
Request must be
authenticated
No
Mode Any alias
On successful match Continue
Target zone Overseas office
State Enabled
Rule #2
Field Value
Rule name Overseas office - strip domain
Description Query overseas office with domain removed
Cisco VCS Administrator Guide (X8.1.1) Page 184 of 507
Dial plan and call processing
Example searches and transforms
To Next Page
Loading...
