Cisco TelePresence Administrator's Guide

Name Description
To n for REGISTER requests: the AOR for the REGISTER request
n for INVITEs: the original alias that was dialed
n for all other SIP messages: the AOR of the destination.
Request-
URI
The SIP or SIPS URI indicating the user or service to which this request is being addressed.
Num-bytes The number of bytes sent/received in the message.
Protocol-
buffer
Shows the data contained in the buffer when a message could not be decoded.
Duration Request/granted registration expiry duration.
Time A full UTC timestamp in YYYY/MM/DD-HH:MM:SS format. Using this format permits simple ASCII text
sorting/ordering to naturally sort by time. This is included due to the limitations of standard syslog
timestamps.
Level The level of the event as defined in the About Event Log levels section.
UTCTime Time the event occurred, shown in UTC format.
Events and levels
The following table lists the events that can appear in the Event Log.
Event Description Level
Alarm
acknowledged
An administrator has acknowledged an alarm. The Detail event parameter provides
information about the nature of the issue.
1
Alarm lowered The issue that caused an alarm to be raised has been resolved. The Detail event
parameter provides information about the nature of the issue.
1
Alarm raised The VCS has detected an issue and raised an alarm. The Detail event parameter
provides information about the nature of the issue.
1
Admin Session
CBA
Authorization
Failure
An unsuccessful attempt has been made to log in when the VCS is configured to use
certificate-based authentication.
1
Admin Session
Finish
An administrator has logged off the system. 1
Admin Session
Login Failure
An unsuccessful attempt has been made to log in as an administrator. This could be
because an incorrect username or password (or both) was entered.
1
Admin Session
Start
An administrator has logged onto the system. 1
Application Exit The VCS application has been exited. Further information may be provided in the Detail
event parameter.
1
Application
Failed
The VCS application is out of service due to an unexpected failure. 1
Application
Start
The VCS has started. Further detail may be provided in the Detail event parameter. 1
Cisco VCS Administrator Guide (X8.1.1) Page 360 of 507
Reference material
About Event Log levels

Cisco TelePresence Specifications

General

Brand	Cisco
Model	TelePresence
Category	Server
Language	English