Field Value
Pattern behavior Replace
Replace string example.co.uk
On successful match Continue
Target zone Head office
State Enabled
Rule #2
Field Value
Rule name Transform to example.net
Description Transform example.com to example.net
Priority 100
Source Any
Request must be
authenticated
No
Mode Alias pattern match
Pattern type Suffix
Pattern string example.com
Pattern behavior Replace
Replace string example.net
On successful match Continue
Target zone Head office
State Enabled
Stripping @domain for dialing to H.323 numbers
SIP endpoints can only make calls in the form of URIs - for example name@domain. If the caller does not
specify a domain when placing the call, the SIP endpoint automatically appends its own domain to the
number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for 123@domain. If
the H.323 endpoint being dialed is registered as 123, the VCS will be unable to locate the alias 123@domain
and the call will fail.
If you have a deployment that includes both SIP and H.323 endpoints that register using a number, you will
need to set up the following pre-search transform and local zone search rules. Together these will let users
place calls from both SIP and H.323 endpoints to H.323 endpoints registered using their H.323 E.164 number
only.
Pre-search transform
On the Create transforms page (Configuration > Dial plan > Transforms > New):
Cisco VCS Administrator Guide (X8.1.1) Page 186 of 507
Dial plan and call processing
Example searches and transforms
To Next Page
Loading...
