Field Value
Priority 1
Description Take any number-only dial string and append @domain
Pattern type Regex
Pattern string (\d+)
Pattern behavior Replace
Replace string \1@domain
State Enabled
This pre-search transform takes any number-only dial string (such as 123) and appends the domain used in
endpoint AORs and URIs in your deployment. This ensures that calls made by SIP and H.323 endpoints
result in the same URI.
Local zone search rules
On the Create search rule page (Configuration > Dial plan > Search rules > New), create two new
search rules as follows:
Rule #1
Field Value
Rule name Dialing H.323 numbers
Description Transform aliases in format number@domain to number
Priority 50
Source Any
Request must be
authenticated
No
Mode Alias pattern match
Pattern type Regex
Pattern string (\d+)@domain
Pattern behavior Replace
Replace string \1
On successful match Continue
Target zone Local Zone
State Enabled
Rule #2
Field Value
Rule name Dialing H.323 numbers
Description Place calls to number@domain with no alias transform
Cisco VCS Administrator Guide (X8.1.1) Page 187 of 507
Dial plan and call processing
Example searches and transforms
To Next Page
Loading...
