TURN relays status
The TURN relays page (Status > TURN relays) lists all the currently active TURN Relays on the VCS. For
each relay, it shows the requesting client address and port and the corresponding VCS address and port.
Note that TURN services are available on VCS Expressways only; they are configured via Configuration >
Traversal > TURN.
The following information is displayed:
Field Description
Relay The index number of the relay.
Address The IP address and port on the VCS of the relay resource that has been allocated for this particular
request.
Client The IP address and port on the NAT (or the client if there is no NAT) that requested the relay.
Creation
time
The date and time the relay became active.
Expiry time The date and time the relay will become inactive.
The Status section also displays the addresses on which the TURN server is listening, and the addresses
from which it is allocating relays.
Viewing TURN relay details
Click View to go to the TURN relay summary page where you can see more information about a relay. From
here further detailed information about the relay can be viewed by using the links in the Related tasks section
at the bottom of the page:
n View permissions for this relay takes you to the TURN relay permissions page, where you can view
information about the permissions that have been defined on the relay.
n View channels for this relay takes you to the TURN relay channels page, where you can view
information about the channel bindings that have been defined on the relay.
n View counters for this relay takes you to the TURN relay counters page, where you can view TURN
request, response and error counters, as well as media counters, for the relay.
Cisco VCS Administrator Guide (X8.1.1) Page 339 of 507
Overview and status information
TURN relays status
To Next Page
Loading...
