cluster.
n The alias generated by the Template must be a fully-qualified SIP alias and must route to the MCU. The
MCU must be configured to process this alias. No other special configuration is required on the MCU in
order to support the Conference Factory application.
n SIP mode must be set to On (Configuration > Protocols > SIP) for the Conference Factory application
to function. If you want to be able to initiate calls to the Conference Factory from H.323 endpoints, you
must also set H.323 mode to On (Configuration > Protocols > H.323), and ensure that H.323 <-> SIP
interworking mode is set to Registered only or On (Configuration > Protocols > Interworking).
See Cisco TelePresence Multiway Deployment Guide for full details on how to configure individual
components of your network (endpoints, MCUs and VCSs) in order to use Multiway in your deployment.
Cisco VCS Administrator Guide (X8.1.1) Page 237 of 507
Applications
Configuring Conference Factory
To Next Page
Loading...
