n All references to OCS/Lync B2BUA have been renamed to refer to Lync B2BUA. The Enhanced OCS
Collaboration option key is now called Microsoft Interoperability.
n References to 'Movi' have been changed to 'Jabber Video'.
n The FindMe configuration page is now accessed directly under Applications > FindMe.
n On the Upgrade page, the VCS platform component is now referred to as System platform.
n The Advanced account security page is now called Advanced security and is accessed via
Maintenance > Advanced security.
n The Local VCS inbound ports page is now called Local inbound ports, and the Local VCS outbound
ports page is now called Local outbound ports.
n The advanced zone configuration Empty INVITE allowed setting is now referred to as Send empty
INVITE for interworked calls.
n The following settings have been removed from the SIP configuration page: Require UDP BFCP mode
and Require Duo Video mode. They existed to provide support for interoperability issues with old
versions of Cisco TelePresence MXP endpoints. These settings can still be configured via the CLI if
necessary.
n The Login account authentication configuration page has been removed, and the Administrator
authentication source and FindMe authentication source settings are now on the Login account
LDAP configuration page.
n The xConfiguration Interworking Require Invite Header Mode is now Off by default.
n The Directory option has been removed from the list of restriction policies on the Registration
configuration page and the list of Call Policy modes on the Call Policy configuration page.
n The DNS lookup tool includes Unified Communications SRV services.
Cisco VCS Administrator Guide (X8.1.1) Page 27 of 507
Introduction
What’s new in this version?
To Next Page
Loading...
