Registration details
The information shown on the Registration details page depends on the device's protocol, and whether the
registration is still current. For example, SIP registrations include the AOR, contact and, if applicable, public
GRUU details. H.323 registration details include all of the registered aliases. It also provides related tasks
that let you View active calls involving this registration and View previous calls involving this
registration; these options take you to the Calls by registration page, showing the relevant current or
historic call status information filtered for that particular registration.
Unregistering and blocking devices
The registration status pages provide options to manually unregister and block devices.
n Click Unregister to unregister the device. Note that the device may automatically re-register after a period
of time, depending on its configuration. To prevent this, you must also use a registration restriction policy
such as an Allow List or Deny List.
n Click Unregister and block to unregister the device and add the alias to the Deny List page, thus
preventing the device from automatically re-registering. (This option is only available if the Restriction
policy is set to Deny List.)
Note that if your VCS is part of a cluster you have to be logged into the peer to which the device is registered
to be able to unregister it.
Cisco VCS Administrator Guide (X8.1.1) Page 329 of 507
Overview and status information
Registration status
To Next Page
Loading...
