Cisco TelePresence - Page 390

String Represents value returned by... When used in a Pattern field When used in a
Replace field
%ipv6% xConfiguration Ethernet 1 IP V6
Address
xConfiguration Ethernet 2 IP V6
Address
Matches the IPv6 addresses
currently configured for LAN
1 and LAN 2.
Applies to all peer addresses
if the VCS is part of a cluster.
not applicable
%ipv6_1% xConfiguration Ethernet 1 IP V6
Address
Matches the IPv6 address
currently configured for LAN
1.
Applies to all peer addresses
if the VCS is part of a cluster.
Replaces the
string with the LAN
1 IPv6 address.
If the VCS is part of
a cluster, the
address of the
local peer is
always used.
%ipv6_2% xConfiguration Ethernet 2 IP V6
Address
Matches the IPv6 address
currently configured for LAN
2.
Applies to all peer addresses
if the VCS is part of a cluster.
Replaces the
string with the LAN
2 IPv6 address.
If the VCS is part of
a cluster, the
address of the
local peer is
always used.
%localdomains% xConfiguration SIP Domains Domain
1 Name
...
xConfiguration SIP Domains Domain
200 Name
Matches all the SIP domains
currently configured on the
VCS.
not applicable
%localdomain1%
...
%localdomain200%
xConfiguration SIP Domains Domain
1 Name
...
xConfiguration SIP Domains Domain
200 Name
Matches the specified SIP
domain. Up to 200 SIP
domains can be configured
on the VCS, and they are
identified by an index number
between 1 and 200.
Replaces the string
with the specified
SIP domain.
%systemname% xConfiguration SystemUnit Name Matches the VCS’s System
Name.
Replaces the string
with the VCS’s
System Name.
You can test whether a pattern matches a particular alias and is transformed in the expected way by using
the Check pattern tool (Maintenance > Tools > Check pattern).
Cisco VCS Administrator Guide (X8.1.1) Page 390 of 507
Reference material
Pattern matching variables