Cisco TelePresence - Page 418

ID Title Description Solution Severity
55008 B2BUA
misconfiguration
Missing or invalid FQDN of service Check the VCS's system host name
and domain name
Warning
55009 B2BUA
misconfiguration
Invalid IP address of service Check the VCS's LAN 1 IPv4 address Warning
55010 B2BUA
misconfiguration
The B2BUA media port range end
value is misconfigured
Check B2BUA configuration
(advanced settings)
Warning
55011 B2BUA
misconfiguration
The B2BUA media port range start
value is misconfigured
Check B2BUA configuration
(advanced settings)
Warning
55012 B2BUA
misconfiguration
Invalid Microsoft Lync B2BUA mode Check B2BUA configuration Warning
55013 B2BUA
misconfiguration
Invalid option key Check option keys Warning
55014 B2BUA
misconfiguration
Invalid hop count Check B2BUA configuration
(advanced settings)
Warning
55015 B2BUA
misconfiguration
Invalid trusted host IP address of
transcoder
Check configured addresses of
trusted hosts
Warning
55016 B2BUA
misconfiguration
The setting to enable transcoders
for this B2BUA is misconfigured
Check B2BUA configuration
(transcoder settings)
Warning
55017 B2BUA
misconfiguration
The port on B2BUA for transcoder
communications is misconfigured
Check B2BUA configuration
(transcoder settings)
Warning
55018 B2BUA
misconfiguration
Transcoder address and/or port
details are misconfigured
Check B2BUA configuration
(transcoder settings) and the
configured addresses of trusted
hosts
Warning
55019 B2BUA
misconfiguration
Invalid TURN server address Check B2BUA configuration (TURN
settings)
Warning
55021 B2BUA
misconfiguration
The setting to offer TURN services
for this B2BUA is misconfigured
Check B2BUA configuration (TURN
settings)
Warning
55023 B2BUA
misconfiguration
The transcoder policy rules are
misconfigured
Check transcoder policy rules
configuration
Warning
55024 B2BUA
misconfiguration
The setting to use transcoder policy
rules is misconfigured
Check B2BUA configuration
(transcoder settings)
Warning
55025 B2BUA
misconfiguration
The B2BUA has been enabled to
use transcoders, but there are no
transcoders configured
Configure one or more transcoders Warning
55026 B2BUA
misconfiguration
TURN services are enabled, but
there are no valid TURN servers
configured
Configure the TURN server address Warning
55028 B2BUA
misconfiguration
The start and end media port ranges
are misconfigured
Check the B2BUA media port range
settings
Warning
55029 B2BUA
misconfiguration
The media port ranges used by the
B2BUA overlap with the media port
ranges used by <module>
Check the port configuration for both
services
Warning
Cisco VCS Administrator Guide (X8.1.1) Page 418 of 507
Reference material
Alarms