SNMP V3AuthenticationType: <MD5/SHA>
Sets SNMP Version 3 authentication type. Default: SHA.
Example: xConfiguration SNMP V3AuthenticationType: SHA
SNMP V3Mode: <On/Off>
Enables or disables SNMP Version 3 support. Default: On.
Example: xConfiguration SNMPV3 Mode: On
SNMP V3PrivacyMode: <On/Off>
Enables or disables SNMP Version 3 privacy. Default: On.
Example: xConfiguration SNMP V3PrivacyMode: On
SNMP V3PrivacyPassword: <S: 0,215>
Sets SNMP Version 3 privacy password. It must be at least 8 characters.
Example: xConfiguration SNMP V3PrivacyPassword: "password123"
SNMP V3PrivacyType: <DES/AES>
Sets SNMP Version 3 privacy type. Default: AES.
Example: xConfiguration SNMP V3PrivacyType: AES
SNMP V3UserName: <S: 0,70>
Sets the username to use when using SNMP V3.
Example: xConfiguration SNMP V3UserName: "user123"
SystemUnit Maintenance Mode: <On/Off>
Sets the VCS into maintenance mode.New calls and registrations are disallowed and existing registrations are allowed to expire.
Default: Off.
Example: xConfiguration SystemUnit Maintenance Mode: Off
SystemUnit Name: <S:, 0, 50>
Defines the name of the VCS. The system name appears in various places in the web interface and on the front panel of the unit.
Choose a name that uniquely identifies the system.
Example: xConfiguration SystemUnit Name: "MainHQ"
TimeZone Name: <S: 0, 64>
Sets the local time zone of the VCS. Time zone names follow the POSIX naming convention e.g. Europe/London or America/New_
York. Default: GMT.
Example: xConfiguration TimeZone Name: "GMT"
Transform [1..100] Description: <S: 0,64>
A free-form description of the transform.
Example: xConfiguration Transform [1..100] Description: "Change example.net to example.com"
Transform [1..100] Pattern Behavior: <Strip/Replace>
How the alias is modified. Default: Strip.
Strip: removes the matching prefix or suffix from the alias.
Replace: substitutes the matching part of the alias with the text in replace string.
AddPrefix: prepends the replace string to the alias.
AddSuffix: appends the replace string to the alias.
Example: xConfiguration Transform 1 Pattern Behavior: Replace
Cisco VCS Administrator Guide (X8.1.1) Page 449 of 507
Reference material
Command reference — xConfiguration
To Next Page
Loading...
