Cisco TelePresence

Zones LocalZone TraversalSubZone Bandwidth Total Limit: <1..100000000>
The total bandwidth (in kbps) allowed for all traversal calls being handled by the VCS (applies only if the mode is set to Limited).
Default: 500000 .
Example: xConfiguration Zones LocalZone TraversalSubZone Bandwidth Total Limit: 500000
Zones LocalZone TraversalSubZone Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not there is a limit to the total bandwidth of all traversal calls being handled by the VCS. Default: Unlimited.
NoBandwidth: no bandwidth available. No traversal calls can be made.
Example: xConfiguration Zones LocalZone TraversalSubZone Bandwidth Total Mode: Limited
Zones Policy Mode: <SearchRules/Directory>
The mode used when attempting to locate a destination. Default: SearchRules.
SearchRules: use the configured search rules to determine which zones are queried and in what order.
Directory: use the facilities of a directory service to direct the request to the correct zones.
Example: xConfiguration Zones Policy Mode: SearchRules
Zones Policy SearchRules Rule [1..2000] Authentication: <Yes/No>
Specifies whether this search rule applies only to authenticated search requests. Default: No.
Example: xConfiguration Zones Policy SearchRules Rule 1 Authentication: No
Zones Policy SearchRules Rule [1..2000] Description: <S: 0,64>
A free-form description of the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Description: "Send query to the DNS zone"
Zones Policy SearchRules Rule [1..2000] Mode: <AliasPatternMatch/AnyAlias/AnyIPAddress>
Determines whether a query is sent to the target zone. Default: AnyAlias.
AliasPatternMatch: queries the zone only if the alias matches the corresponding pattern type and string.
AnyAlias: queries the zone for any alias (but not IP address).
AnyIPAddress: queries the zone for any given IP address (but not alias).
Example: xConfiguration Zones Policy SearchRules Rule 1 Mode: AnyAlias
Zones Policy SearchRules Rule [1..2000] Name: <S: 0,50>
Descriptive name for the search rule.
Example: xConfiguration Zones Policy SearchRules Rule 1 Name: "DNS lookup"
Zones Policy SearchRules Rule [1..2000] Pattern Behavior: <Strip/Leave/Replace>
Determines whether the matched part of the alias is modified before being sent to the target zone. (Applies to Alias Pattern Match
mode only.) Default: Strip.
Leave: the alias is not modified.
Strip: the matching prefix or suffix is removed from the alias.
Replace: the matching part of the alias is substituted with the text in the replace string.
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Behavior: Strip
Zones Policy SearchRules Rule [1..2000] Pattern Replace: <S: 0,60>
The string to substitute for the part of the alias that matches the pattern. (Applies to Replace pattern behavior only.)
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern Replace: "@example.net"
Zones Policy SearchRules Rule [1..2000] Pattern String: <S: 0,60>
The pattern against which the alias is compared. (Applies to Alias Pattern Match mode only.)
Example: xConfiguration Zones Policy SearchRules Rule 1 Pattern String: "@example.com"
Cisco VCS Administrator Guide (X8.1.1) Page 456 of 507
Reference material
Command reference — xConfiguration