LinkAdd
Adds and configures a new link.
LinkName(r): <S: 1, 50>
Assigns a name to this link.
Node1: <S: 1, 50>
Specifies the first zone or subzone to which this link will be applied.
Node2: <S: 1, 50>
Specifies the second zone or subzone to which this link will be applied.
Pipe1: <S: 1, 50>
Specifies the first pipe to be associated with this link.
Pipe2: <S: 1, 50>
Specifies the second pipe to be associated with this link.
Example: xCommand LinkAdd LinkName: "Subzone1 to UK" Node1: "Subzone1" Node2: "UK Sales Office" Pipe1:
"512Kb ASDL"
LinkDelete
Deletes a link.
LinkId(r): <1..3000>
The index of the link to be deleted.
Example: xCommand LinkDelete LinkId: 2
ListPresentities
Returns a list of all the presentities being watched by a particular subscriber.
Subscriber(r): <S:1, 255>
The URI of the subscriber who is watching.
Example: xCommand ListPresentities Subscriber: "john.smith@example.com"
ListSubscribers
Returns a list of all subscribers who are watching for the presence information of a particular presentity.
Presentity(r): <S:1, 255>
The URI of the presentity being watched.
Example: xCommand ListSubscribers Presentity: "mary.jones@example.com"
Cisco VCS Administrator Guide (X8.1.1) Page 477 of 507
Reference material
Command reference — xCommand
To Next Page
Loading...
