ZoneAdd
Adds and configures a new zone.
ZoneName(r): <S: 1, 50>
Assigns a name to this zone.
Type(r): <Neighbor/TraversalClient/TraversalServer/ENUM/DNS>
Determines the nature of the specified zone, in relation to the local VCS. Neighbor: the new zone will be a neighbor of the local
VCS. TraversalClient: there is a firewall between the zones, and the local VCS is a traversal client of the new zone.
TraversalServer: there is a firewall between the zones and the local VCS is a traversal server for the new zone. ENUM: the new
zone contains endpoints discoverable by ENUM lookup. DNS: the new zone contains endpoints discoverable by DNS lookup.
Example: xCommand ZoneAdd ZoneName: "UK Sales Office" Type: Neighbor
ZoneDelete
Deletes a zone.
ZoneId(r): <1..1000>
The index of the zone to be deleted.
Example: xCommand ZoneDelete ZoneId: 2
ZoneList
A diagnostic tool that returns the list of zones (grouped by priority) that would be queried, and any transforms that would be applied, in
a search for a given alias.
Note that this command does not change any existing system configuration.
Alias(r): <S: 1, 60>
The alias to be searched for.
Example: xCommand ZoneList Alias: "john.smith@example.com"
Cisco VCS Administrator Guide (X8.1.1) Page 487 of 507
Reference material
Command reference — xCommand
To Next Page
Loading...
