Cisco UCS 6248 UP - Cable and Port Specifications

APPENDIX B
Cable and Port Specifications
This appendix includes the following sections:
• Accessory Kit for the Cisco UCS Fabric Interconnect, on page 71
• Console Cable, on page 72
• Console Port, on page 72
• Supported AC Power Cords and Plugs, on page 73
Accessory Kit for the Cisco UCS Fabric Interconnect
The Cisco UCS 6248 Fabric Interconnect accessory kit includes the following items:
• 2 slider rails
• 2 rack-mount guides
• 2 rack-mount brackets
• 12 M4 x 0.7 x 8-mm Phillips countersunk screws
• 10 10-32 rack nuts
• 10 10-32 x 3/4-inch Phillips pan-head screws
• 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
• 1 ground lug kit
• 1 ESD wrist strap
• 1 power cord clip (a wire clip that is used to retain the power cord)
• 1 pointer document (specifies where to find the online product documentation)
Additional parts can be ordered from your customer service representative.
Note
Cisco UCS 6200 Series Fabric Interconnect Hardware Installation Guide
71OL-24475-03