Cisco UCS B200 M5 User Manual

Before You Begin
Before installing the NVIDIA P6 GPU (UCSB-GPU-P6-R) in the rear mezzanine slot:
•
Upgrade the Cisco UCS domain that the GPU will be installed into to a version of Cisco UCS Manager
that supports this card. Refer to the latest version of the Release Notes for Cisco UCS Software at the
following URL for information about supported hardware: http://www.cisco.com/c/en/us/support/
servers-unified-computing/ucs-manager/products-release-notes-list.html.
•
Remove any other card, such as a VIC 1480, VIC 1380, or VIC port expander card from the rear
mezzanine slot. You cannot use any other card in the rear mezzanine slot when the NVIDIA P6 GPU
is installed.
Cisco UCS B200 M5 Blade Server Installation and Service Note
47
Servicing a Blade Server
Installing an NVIDIA GPU Card in the Rear of the Server

Cisco UCS B200 M5 Specifications

General

Form Factor	Blade
Processor	Intel Xeon Scalable Processors
Management	Cisco UCS Manager
Processor Sockets	2
Product Type	Blade Server
Memory	Up to 3 TB DDR4
Memory Slots	24 DIMM slots
Storage	Up to 2 x SAS/SATA drives
Expansion Slots	Mezzanine card
RAID Support	RAID 0, 1
Network	10 Gigabit Ethernet, 25 Gigabit Ethernet
Power Supply	Part of UCS Blade Server Chassis