Chapter 1 Overview
Front-Panel Description
1-14
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-03
To select or change the port mode, press the Mode button (see Figure 1-13,
Figure 1-14, and Figure 1-15) to highlight the mode that you want. Release the
button to enable the highlighted mode.
Figure 1-13 Changing the Port Mode on Catalyst 2950-12, 2950-24, 2950C-24,
2950SX-24, and 2950T-24 Switches
Table 1-4 Port Mode LEDs
Mode LED Port Mode Description
STAT Port status The port status. This is the default mode.
UTIL Switch utilization The current bandwidth in use by the switch.
DUPLX Port duplex mode The port duplex mode: half duplex or full duplex.
SPEED Port speed The port operating speed: 10 or 100 Mbps for 10/100 ports
and 10, 100, or 1000 Mbps for 10/100/1000 ports.
SYST
RPS
DUPLX
MODE
SPEED
UTIL
S TAT
1x
2x
3x
4x
5x
6x
52917
Mode button
To Next Page
Loading...
Need help?
General